Designing a Cuttle.xyz Keychains
1. Click on New Blank Project
2. Drag highlighted element
3. Change Dimentions
4. Use Stencil Font
5. Type NOOR
6. Select both shapes and align them vertically
7. Select both shapes and align them horizontally
8. Shapes aligned
9. Add a smaller circle
10. Align the circles vertically
11. Select both shapes then Click on Modify
12. Click on Boolean Union (Weld)
13. Add a third smaller circle
14. Align circle 3 in center of circle 2
15. Click on File
16. Export DXF…
17. Add a New Component
18. Click on Text…
19. Select the text style
20. Type your name
21. change font
22. find fond that support Arabic
23. Add letter spacing
24. Text will look like this
25. Right Click on Duplicate
26. Click on Modify
27. Click on Outline Stroke
28. Change width of stroke
29. Move the stroke made downwards
30. Right Click on Convert to Paths
31. Select unwanted shapes inside stroke
32. Right click and delete unwanted shapes inside stroke
33. right Click on oroginal text and Convert to Paths
34. Text and Stroke are seperated
35. Drag each letter of text inside the stroke
36. Drag letters
37. Drag letters
38. Bring strokes and letters closer together
39. once all strokes are connected, select them all
40. All strokes are one piece
41. Add a small circle
42. Select circle + stroke and align them vertically
43. select circle and stroke wothout the text Click on Modify
44. Click on Boolean Union (Weld)
45. stroke and circle are one piece now
46. Add a smaller circle for the hole
