Gap Minus Rule

This rule allows you to accept reservations minus the value assigned it, when using both Gap and Back to Back Gap Logic.

For example, if your Gap value is 5 and you have Back to Back Gap logic enabled, this means you will only take 5 night reservations, but if you assign 1 in this rule then you will accept 5 and 4 nights reservations.

RevMax

  1. 1. On the Tape Chart, click on Availability Rules

    On the Tape Chart, click on Availability Rules

  2. 2. Click on Gap Value

    Click on Gap Value

  3. 3. Check the Back to Back Gap logic box

    Check the Back to Back Gap logic box

  4. 4. Assign the value in Gap Minus Rule

    Assign the value in Gap Minus Rule