Posting Checks via Checkscan

  1. 1. From the Checkscan Home Page, select New Batch

    Double check property code is correct and vertical is listed as "Senior"

    From the Checkscan Home Page, select New Batch
  2. 2. Input Total Declared and Items Declared

    Ensure the scanner is connected by clicking the gear symbol on the left side and then the prong symbol. The scanner should show a green light that it is connected.

    Input Total Declared and Items Declared
  3. 3. Put check(s) in scanner and select "Go"

    Put check(s) in scanner and select "Go"
  4. 4. Select the colored box to open Elevate screen

    Select the colored box to open Elevate screen
  5. 5. Select the "Edit" option

    Select the "Edit" option
  6. 6. Verify or Edit the below information and then Save

    Verify or Edit the below information and then Save
  7. 7. Select the "Edit" option

    Select the "Edit" option
  8. 8. Review the Resident and Payer information

    Review the Resident and Payer information
  9. 9. Confirm the Resident payer code in Elevate matches Yardi

    Confirm the Resident payer code in Elevate matches Yardi
  10. 10. Confirm the Primary Payer code in Elevate matches Yardi

    Confirm the Primary Payer code in Elevate matches Yardi
  11. 11. Select Enter Details

    Select Enter Details
  12. 12. Back in Checkscan, Select the "Review Report" icon

    Back in Checkscan, Select the "Review Report" icon
  13. 13. Download and print the Deposit Report

    Download and print the Deposit Report
  14. 14. Select the "Post" icon to post the batch

    Posted batch will show up in Elevate

    Select the "Post" icon to post the batch